Using Nightringer on the Skyswitch Hosted PBX Platform.

Using Nightringer on the Skyswitch Hosted PBX Platform.

SkySwitch can register your CyberData device’s Nightringer function as either a separate SIP device or as a "Secondary Device." The difference is that when Nightringer is registered as a Secondary Device the SIP credentials used are the same as those for the Primary SIP Server except that a "b" is tacked onto the end of the extension number.

The benefit to registering the Nightringer as a Secondary Device is that while, as in this example, extension 703 and extension 703b are treated as separate extensions by Skyswitch only a single extension license is used. See the example below using a CyberData SIP Speaker. This same method can be used on any CyberData device that has the Nightringer function.



    • Related Articles

    • Compatible IP-PBX Servers and SIP Registration

      To answer SIP calls, CyberData devices need to be registered with a SIP server.  The registration process requires entering SIP credentials provided by the SIP Server into the CyberData device. Credential formats vary by vendor and the credentials ...
    • CyberData and RingCentral

      The following information is the most commonly inquired support topics between CyberData and RingCentral IP-PBX CyberData Device - Not Registering or Drops Registration Make sure that the CyberData device is registering with a RingCentral extension ...
    • Point-To-Point Calls Using a Yealink T42G IP Phone and CyberData Device

      In a SIP point-to-point configuration, a Yealink T42G IP phone and CyberData device can place calls to each other on the same network without a SIP server.   CyberData Device Configuration For your reference, instructions ...
    • Point-To-Point Calls Using a Snom 3xx IP Phone and CyberData Device

      In a SIP point-to-point configuration, a Snom 3XX series IP phone and CyberData device can place calls to each other on the same network without a SIP server.   CyberData Device Configuration For your reference, instructions ...
    • Point-To-Point Calls Using a Polycom VVX IP Phone and CyberData Device

      In a SIP point-to-point configuration, a Polycom VVX series IP phone running UC Software and CyberData device can place calls to each other on the same network without a SIP server.   CyberData Device Configuration For your reference, instructions ...