Supported Special Characters for passwords

Supported Special Characters for passwords

Creating a strong password is extremely important for any password that is used. Contrary to popular belief, longer passwords are more secure than passwords with special characters. However, many password manager tools or SIP IP/PBX servers require special characters. We recommend alphanumeric passwords (numbers and letters), but when needed, CyberData devices support some special characters that can be used for the login password and the SIP Authentication password.

The following characters are supported:
! * - _ = + | @

Characters that are NOT supported:
< > { } [ ] / \ & ^ ?

    • Related Articles

    • Supported Special Characters for passwords

      Creating a strong password is extremely important for any password that is used. Contrary to popular belief longer passwords are more secure than passwords with special characters. However many password manager tools or SIP IP/PBX servers require ...
    • Supported Web Browsers

      CyberData products have been tested but not limited to the following web browsers and their respective updates: - Internet Explorer 11 - Mozilla Firefox - Google Chrome - Chromium-based browsers such as Edge, Brave, Vivaldi, etc.
    • Supported Web Browsers for Products

      CyberData products have been tested but not limited to the following web browsers and their respective updates: - Internet Explorer 11 - Mozilla Firefox - Google Chrome - Chromium-based browsers such as Brave, Edge, Vivaldi, etc.
    • Are your speakers RFC 3261 compliant?

      Our speakers are compliant with RFC 3261, but not every SIP extension is fully supported, such as extensions for certain phone features that our speakers do not require.
    • Intercom Does Not Activate Relay Using DTMF from Cisco/Linksys SPA Series Phones

      I am using Cisco/Linksys SPA series deskphones.  The CyberData intercom does not recognize the DTMF tones from these phones to unlock the door.   CyberData devices may detect more than one digit press when the ‘Mark All AVT Packets’ is set to Yes on ...