Config Files

Config Files

By default, config files are titled: exported_config.xml

The file must be extracted before upgrading the firmware.

If the firmware is upgraded and the device is not restored to factory default settings when extracting the config file, you will get a blank or garbled xml file. To properly load a config file, restore to factory settings first.

    • Related Articles

    • How do I update my firmware?

      Go to the main CyberData website to search for your product: VoIP – CyberData Corporation Once found, navigate to the Downloads tab, and match the serial numbers listed to the serial number of your device. Download the latest firmware to your ...

    • Audio Files

      What type of audio files can be uploaded into the Intercom or Office Ringer? RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, mono 8000 Hz, no spaces between words in the file title. You can use the free website utilities G711 File ...

    • Where do I find the latest firmware for my CyberData product.

      CyberData always recommends that your CyberData products be kept on the latest firmware version. Go to the main CyberData website to search for your Voice over IP (VoIP) product. For example, let's say you want the latest firmware for your CyberData ...

    • Audio files for Multicast Mode

      What type of files can I send to the IP Speaker in Multicast mode? G711 u-Law or A-law 8 bit 8000 hz 160 byte packets every 20ms

    • Adding New CyberData Devices to 3CX

      This article details the process of how to load the attached template into 3CX to provision newer CyberData devices on 3CX. The process is slightly different for Linux based systems when compared to Windows. Please follow the correct steps based on ...