Compatible Analog Amplifiers
The Paging Server and Paging Adapter provide line-level audio output that is compatible with most analog paging amplifiers. Audio output is through two analog audio ports, one is a 600Ω balanced output and the other is an unbalanced 10K output.
A partial list of compatible analog amplifiers along with connection diagrams can be found here:
If your amplifier is not on this list, please contact CyberData Technical Support at (831) 373-2601 X333 or open a support ticket with us at support.cyberdata.net.
Compatible IP-PBX Servers and SIP Registration
To answer SIP calls, CyberData devices need to be registered with a SIP server. The registration process requires entering SIP credentials provided by the SIP Server into the CyberData device. Credential formats vary by vendor and the credentials ...
600 Ohm Lo-Z Connection to CyberData Paging Amplifier
How do I connect a 600 Ohm Lo-Z input or output to the V2 Paging Amplifier's Line Input or Output? The V2 Paging Amplifier's Line Input and Output are 10K Ohm Hi-Z. 600 Ohm (Low-Z) Pageport audio devices can interface with the Paging amplifier using ...
Configuration Support Services
CyberData’s Technical Support Configuration Services Takes the Headache Out of Installing Your New SIP Device Our team is ready and available to schedule an appointment for you! 831-373-2601, ext 333 1st Hour: $125 2nd Hour: $95 Basic SIP ...
Are the speaker contacts potential-free?
Our loudspeaker outputs are potential-free. If no paging input occurs, the outputs is at or near zero voltage.
CyberData and RingCentral
The following information is the most commonly inquired support topics between CyberData and RingCentral IP-PBX CyberData Device - Not Registering or Drops Registration Make sure that the CyberData device is registering with a RingCentral extension ...