600 Ohm Lo-Z Connection to CyberData Paging Amplifier
How do I connect a 600 Ohm Lo-Z input or output to the V2 Paging Amplifier's Line Input or Output?
The V2 Paging Amplifier's Line Input and Output are 10K Ohm Hi-Z. 600
Ohm (Low-Z) Pageport audio devices can interface with the Paging
amplifier using a Hi-Z to Lo-Z impedance matching transformer. For
example, the Bogen WMT1A input matching transformer is an easy to use,
inexpensive solution that does not require soldering or complex wiring.
Related Articles
Compatible Analog Amplifiers
The Paging Server and Paging Adapter provide line-level audio output that is compatible with most analog paging amplifiers. Audio output is through two analog audio ports, one is a 600Ω balanced output and the other is an unbalanced 10K output. A ...
Audio Files
What type of audio files can be uploaded into the Intercom or Office Ringer? RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, mono 8000 Hz, no spaces between words in the file title. You can use the free website utilities G711 File ...
Paging Server Multicast Configuration with CyberData Products
The following is in regards to setting up multicast between the CyberData 011146 SIP Paging Server and other CyberData products. 011146 SIP Paging Server with Bell Scheduler – CyberData Corporation Note: The Paging Server in these examples is already ...
CyberData VoIP Discovery Utility
The Discovery Utility will scan the network and display any found CyberData VoIP devices. The utility can be downloaded here - https://files.cyberdata.net/assets/common/discovery.zip. After extracting the files launch the program titled ...
CyberData and RingCentral
The following information is the most commonly inquired support topics between CyberData and RingCentral IP-PBX CyberData Device - Not Registering or Drops Registration Make sure that the CyberData device is registering with a RingCentral extension ...