DESCRIPTION:
The AddMaster 20xx series POS printer emulation module uses the Serial
Buffer Module and an Epson printer to allow a drop-in replacement.
FEATURES:
► Low cost
► Drop-in replacement
► Soft firmware download
► Epson Thermal and dot matrix...
DESCRIPTION:
The DH Module uses the versatile Serial Buffer II Module to provide
emulation of the DH Technology 47xx printer.
FEATURES:
► Low cost
► Drop-in replacement
► Downloadable firmware
► Epson Thermal and dot matrix printer support
Click to go to Product Page for Ethernet IV Module (010748)
[http://www.cyberdata.net/retail/010748-2/]
DESCRIPTION:
The P7 III module product line emulates both the IBM Models 3 and 4R
POS printers and the new 4610 printer. This module can be used in the
Epson H5000II, T88II and H6000 printers. With the protocol emulation,
the P7 III easily connects to the...
DESCRIPTION:
The IBM 4712 dot matrix printer with the serial interface can now be
replaced with a higher reliability and faster Epson thermal printer,
the H5000II. Using the Epson IBM 4712 Connect-IT module, users of the
IBM 4712 printer can simply unplug...
Click to go to the page for Internet Printer Adapter (/011163 /
011167) [http://www.cyberdata.net/retail/011163011167-2/]
DESCRIPTION:
PoweredUSB 6-port hub and cable kit for testing Epson, IBM, and other
printers having a +24 volt PoweredUSB Connection. If you are testing
printers with PoweredUSB then you will need our external PoweredUSB
Hub Test Kit.
The CyberData power...
DESCRIPTION:
The RS-232 EJ Module replaces the standard RS-232 Connect-IT(R) module
and turns an EPSON printer, even those without a journal station, into
a journal collection and storage device with the ability to store and
retrieve journal data. Data ca...
DESCRIPTION:
The Serial Buffer II Module (SB2M) provides adaptability for all of
the Connect-IT(R) line of EPSON POS Printers. The SB2M provides a
large input buffer to the printer so that printer operations do not
slow down the host terminal. This abilit...
DESCRIPTION:
The Star Emulation Module emulates Star SP200 and Star SP300 series
printers and was extensively tested in both the TM-U220 and the
TM-T88II printers. The module should drop in and work in all Epson POS
printers that support the _Connect-It_ ...
