CyberData Home Tech Support
 Knowledgebase
RSS Feed
Knowledgebase : VoIP > SIP to Analog/Multicast Adapters > Paging Server
CYBERDATA’S TECHNICAL SUPPORT CONFIGURATION SERVICES TAKES THE HEADACHE OUT OF INSTALLING YOUR NEW SIP DEVICE Our team is ready and available to schedule an appointment for you! 831-373-2601, ext 333 1st Hour: $125 2nd Hour: $95 * Basic SIP regi...
_Can you give me specifications for the correct alternate power supply needed if I don’t have a Switch?_ The most cost-effective option would be to use our POWER INJECTOR (011124) [HTTPS://WWW.CYBERDATA.NET/COLLECTIONS/ACCESSORIES/PRODUCTS/011124], plug...
See the attached documents for information on how to page to phones that listen to Multicast.
The 99 zones supported are with a Bogen-type Zone Controller, in that our product is able to recognize the two-digit DTMF tone the user enters after it receives a cal and passes this tonal information to the Zone Controller so that the specific paging zon...
How to configure a Paging Server to page to Polycom phones: Paging Server firmware version 7.2.0 featured the addition of Polycom Group Paging support. The Paging Server can send multicast pages to Polycom phones running UC software versions 4.0.0 and h...
_I have set up the CyberData Paging Server per the instructions along with the CyberData VoIP speakers. I can ping the Paging Server, pull up the server web pages, and see that it is registering with the SIP server. However, when I dial the SIP extension,...
February 17, 2016 - The CyberData SIP Paging Adapter (Part #011233) and VoIP V3 Paging Server (Part #011146) have been added to the BroadSoft BroadWorks validation for SIP and Device Management interoperability. An updated Partner Configuration Guide ha...
Click to go to the product page for SIP V2 Paging Server (End of Life 011092) [http://www.cyberdata.net/voip/011092/]
The Paging Server's page prompt audio files are restarted when you attempt to make a page. The page prompt audio files depend on whether the setting _Bypass DTMF _is enabled on the PGROUPS configuration page of the web interface. If you are autoprovisio...
Our Paging Server is a POE enabled, single SIP-endpoint enabling user defined paging zones through a multicasting connection to CyberData VoIP speakers.