CyberData Home Tech Support
Alternate Power Supply
Posted by CyberData Administrator, Last modified by Harry H on 19 July 2021 08:53 AM

Can you give me specifications for the correct alternate power supply needed if I don’t have a Switch?

The most cost-effective option would be to use our Power Injector (011124), plugging one end into the network source (non-PoE hub) and one end into the device.

Alternatively, for products like the Paging Server (011146), the Paging Adapter (011123) and 4 Port Zone Controller (011171) with the +48VDC power jack, we recommend using the CISCO 48V supply CP-PWR-CUBE-3.

These devices can be powered locally with a power adapter (Cisco part number CP-PWR-CUBE-3) and the appropriate power cord (power requirements for the power adapter: 100-240 VAC, 50-60 Hz, 0.5 A).