CyberData Home Tech Support
 Knowledgebase
RSS Feed
Knowledgebase : VoIP > SIP Speaker and Amplifiers > SIP Amplifiers
CYBERDATA’S TECHNICAL SUPPORT CONFIGURATION SERVICES TAKES THE HEADACHE OUT OF INSTALLING YOUR NEW SIP DEVICE Our team is ready and available to schedule an appointment for you! 831-373-2601, ext 333 1st Hour: $125 2nd Hour: $95 * Basic SIP regi...
_I upgraded my 3CX PBX server to 7.1 and now my Rev B CyberData VoIP IP Speaker and My VoIP Paging Amplifier do not stay registered with the server._ There is a 3CX version 7.1 registration / timing bug. To correct this problem, complete the following s...
_How do I connect a 600 Ohm Lo-Z input or output to the V2 Paging Amplifier's Line Input or Output?_ The V2 Paging Amplifier's Line Input and Output are 10K Ohm Hi-Z. 600 Ohm (Low-Z) Pageport audio devices can interface with the Paging amplifier using a...
_When connecting two 8 ohm speakers to the product while in standard low power mode, the unit will reset at full volume pages._ The connection of two 8 ohm speakers in parallel under both Standard and High Power Mode require the use of the CyberData PoE...
_I have a Cisco Catalyst 2900 series switch. How do I set the unit so that it can use the PoE (under 15.4w) instead of an external power source?_ There are known PoE limitations with third party devices on the Cisco Catalyst series switches. This includ...
_How many horns can be connected to an amplifier?_ CyberData's VoIP Paging Amplifier supports the following outputs: * One 8-ohm speaker: 8 watts * One 8-ohm speaker with external PoE power injector (CyberData PN 010867): 10 watts * Two 8-ohm sp...
_Is it possible with one Paging Amplifier to have multiple paging groups?_ Since the VoIP Paging Amplifier is a single SIP endpoint, it can not have multiple paging groups.
_I upgraded my 3CX PBX server to 7.1 and now my Rev B CyberData VoIP IP Speaker and My VoIP Paging Amplifier do not stay registered with the server._ There is a 3CX version 7.1 registration / timing bug. To correct this problem, complete the following s...
_What 8 ohm speakers are recommended for the Paging Amplifier?_ CyberData's 011068 Loudspeaker [http://www.cyberdata.net/products/voip/accessories/011068speaker/index.html].