CyberData Home Tech Support
 Knowledgebase
Knowledgebase:
CyberData VoIP Discovery Utility
Posted by CyberData Administrator, Last modified by CyberData Administrator on 08 June 2015 09:34 AM

The Discovery Utility scans the network and reports back any found VoIP devices that are attached to the physical network.

The attached zip file contains the following:

  • CyberData VoIP Discovery Utility Version 1.2.0 (Note: Version 1.2.0 adds support for new products.)
  • VoIP Discovery Utility Program Instructions as a PDF file
  • Text file with the version history

Please note that while the utility allows you to see the IP addressing scheme, only devices set to Static Addressing mode can be configured from the utility. Typically, CyberData devices are set to DHCP addressing mode on default.

Below are screen captures of the utility in use (attached).

Devices found
Devices found

 

Details
Details of the device. Note: When DHCP is enabled on the device, IP addressing information entered in the Adv. Config window will not take effect.

 

Configuration
Configuration



Attachments 
 
 voip_discovery_utility.zip (555.53 KB)
 found.jpg (55.69 KB)
 details.jpg (46.79 KB)
 config.jpg (45.62 KB)