CyberData Home Tech Support
 Knowledgebase
Alternate Power Supply
Posted by CyberData Administrator, Last modified by Wayne T on 18 March 2016 10:21 AM

Can you give me specifications for the correct alternate power supply needed if I don’t have a Switch?

The most cost-effective option would be to use our Power Injector (010867), plugging one end into the network source (non-PoE hub) and one end into the device.

Alternatively, for products like the Paging Server (011146), the Paging Gateway (010846 -End of Life) and 4 Port Zone Controller (011171) with the +48v power jack, we recommend using the CISCO 48V supply CP-PWR-CUBE-3.

These devices can be powered locally with a power adapter (Cisco part number CP-PWR-CUBE-3=) and the appropriate power cord (power requirements for the power adapter: 100-240 VAC, 50-60 Hz, 0.5 A).